Filter
Top Products
NTI AUDIO/HD VIDEO MATRIX SWITCH
32
RACK MOUNTING INSTRUCTIONS
This NTI switch was designed to be directly mounted to a rack. It includes a mounting flange to make attachment easy.
Install 4 captive nuts to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch.
Then secure the NTI switch to the rack using four 3/16" diameter screws (not provided). Each screw should be of sufficient
length to go completely through the NTI mounting flange, rack frame and fully engage all threads in the captive nut. Be sure to
tighten all mounting screws securely.
Do not block power supply vents in the NTI switch chassis (if provided) . Be sure to enable adequate airflow in front of and
behind the NTI switch.
Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.
Figure 23- Mount the VEEMUX-A to a rack
1275 Danner Drive
Aurora Ohio 44212
NTI
NETWORK
TECHNOLOGIES
INCORPORATED
Tel: 330-562-7070
Fax: 330-562-1999
R
www. nti1.com
Rack
3/16” Diameter
Screws
Captive
Nuts