Filter
Top Products
NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
25
Display Usage
To display usage statistics for the UNIMUX, press <D> from the Administration menu.
The Display Usage page shows the user how many times the UNIMUX has been power cycled and how many total hours it has
been powered ON. The counters for these statistics can be reset to 0 by pressing <F7> to reset the number of power cycles or
<F8> to reset the hours of usage.
Figure 29- Usage Statistics Page
Idle Timeout
The idle timeout is the amount of time that the user can be idle while in Command Mode before the user is automatically logged
out. The idle timeout can be set to any value from 000 to 255 minutes. A value of 000 will disable it. After the idle timeout
period has elapsed, the login screen will appear.
To change the Idle Timeout setting,
1. press <I> from the System Configuration menu (page 22) to display the
edit field around the value (see Figure 30)
2. enter the desired value (000-255 minutes)
3. press <Enter> to save it and move to the next field
4. press <Esc> to exit the System Configuration menu
Figure 30- Change value of Idle Timeout
OSD Blank Timeout
The OSD Blank Timeout is the amount of time that the user can be idle while in Command Mode before the OSD menu will
disappear. The time period can be set to any value from 000 to 255 minutes. A value of 000 will disable it. After the OSD
disappears when the configured time period has elapsed, the user can make it reappear by either pressing a key on the keyboard
or moving the mouse.
To change the OSD Blank Timeout setting,
1. press <O> from the System Configuration menu to display the
edit field around the value (see Figure 31)
2. enter the desired value (000-255 minutes)
3. press <Enter> to save it and move to the next field
4. press <Esc> to exit the System Configuration menu
Figure 31- Change the value of OSD Blank Timeout