Network Technologies UNIMUXUSBVXHD Switch User Manual


 
NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
38
Figure 42- Cascaded connections with multi-user slaves
Operating Cascaded Switches
Immediately after powering-ON the Master switch, the following splash screen will display on the monitor:
All the downstream switches should be powered ON before pressing any key. If there are USB extenders connected, they should
also be powered ON. An extra time of about 5 seconds after powering-ON the last unit may be needed to complete the USB
enumeration process. If the switch is a standalone unit (no downstream switches connected), the key could be pressed
immediately.
CPU 1 CPU 2 CPU 5 CPU 6 CPU 7 CPU 8
CPU 3 CPU 4
MONI TOR 1
USER
1
USER
2
MON ITOR 2MONI TOR 3
USER
3
USER
4
MON ITOR 4
RS232
R
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Au ro ra, O H 442 02
www.net workte chinc.c om
R
250V,2A
12 4 11 3
10 2
9 1
CPU CPU
16 8 15 7
14 6
13 5
CPU CPU
NETWORK TECHNOLOGIES INCORPORATED 1275 Danner Drive, Aurora Ohio 44202 330-562-7070 www.networktechinc.com
MON ITOR
RS232
HDUSBVEXT-xx-MM
HDUSBVEXT-xx-MM
Rear View of UNIMUX-USBV-16HDU
Rear View of
UNIMUX-4X8-UHDU
Master
Slave
CPU 1 CPU 2 CPU 5 CPU 6 CPU 7 CPU 8
CPU 3 CPU 4
MON ITOR 1
USER
1
USER
2
MON ITOR 2MONITOR 3
USER
3
USER
4
MONI TOR 4
RS232
R
NTI
Te l :3 30 - 5 62-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.ne tworkte chinc.c om
R
Slave
Rear View of
UNIMUX-4X8-UHDU