Filter
Top Products
Nextel RoadRunners Scanner Programming Guide
Last updated: 10/14/05 3
© Baracoda 2005
Switch on delay: 2 seconds Switch on delay: 0 second (*)
\VT\VTz\NUL\SOH\ETX\FF\FF
swi tch on del ay : 2 secs
\VT\VTz\NUL\SOH\SOH\FF\FF
swi tch on del ay : 0 sec
No Data Loss Mode
Baracoda has developed a proprietary communication protocol for enhanced Bluetooth
®
transmission security.
Every barcode sent to the handset must be acknowledged by the handset (i.e. the scanner will continue to
transmit the barcode until acknowledgement is received).
This acknowledgment is disabled in the default settings. It is strongly recommended that this acknowledgment
protocol be set to ON when using the scanner with the BaracodaManager.
“No Data Loss mode” ON Enables the Baracoda header +
“No Data Loss mode” OFF (*)
\VT\VTH\NUL\SOH\SOH\FF\FF
baracoda header + ACK
\ VT\ VTH\ NUL\ SOH\ NUL\ FF\ FF
baracoda header
Timestamp Option
The timestamp can be configured (ON/OFF, set new date and new time) with the following configuration
barcodes.
Timestamp on Timestamp off (*)
\VT\VT\ FNC4h\ NUL\ SOHd\ FF\FF
timestampon
\VT\VT\FNC4h\NUL\SOHb\FF\FF
Timestamp off