Filter
Top Products
Nextel RoadRunners Scanner Programming Guide
Last updated: 10/14/05 4
© Baracoda 2005
Programming procedure for “Set Timestamp” option
Set Timestamp “END of Config”
\ VT\VT\FNC4t\ NUL\ NUL\LF\ LF
Set Ti mestamp
\LF\LFEND\FF\FF
END of Conf i g
Note: The timestamp must comply with the following specific format:
{YY} {MM} {DD} {HH} {MM} {SS}
Setting the timestamp is accomplished by scanning the 0-9 labels (see Appendix 2), in accordance with the
timestamp format shown above.
Read "Set Suffix (prefix)" label
START
Read intermediary label
Corresponding to the next character to set
for the suffix (appendix 2 of this document)
Finished *?
Read "END of config" label
END
NO
YES