Filter
Top Products
E71
Reference Section
Eye-Fi Upload
Select whether or not the camera’s Eye-Fi card (available from third-party manufacturers)
sends images to your computer.
B Notes About Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Remove your Eye-Fi card from the camera where wireless devices are prohibited. Signals may be
transmitted even if Disable is selected.
• Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.
• The camera is not compatible with the Endless Memory function. When it is set on a computer,
disable the function. If the Endless Memory function is enabled, the number of images taken may
not be displayed correctly.
• Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the batteries being depleted in a shorter period of time.
C Eye-Fi Communication Indicator
The communication status of the Eye-Fi card in the camera can be confirmed in the monitor (A 3,
5).
• w: Eye-Fi upload is set to Disable.
• x (lights): Eye-Fi upload enabled; waiting to begin upload.
• x (flashes): Eye-Fi upload enabled; uploading data.
• y: Eye-Fi upload enabled but no images available for upload.
• z: An error occurred. The camera cannot control the Eye-Fi card.
d button M z tab M Eye-Fi upload M k button
Option Description
bEnable Upload images created by the camera to a preselected destination.
cDisable (default setting) Images are not uploaded.