Filter
Top Products
E15
Reference Section
Using Macro Mode
Use macro mode when taking close-up images.
1 Press the multi selector I (p).
2 Select ON and press the k button.
• If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
3 Move the zoom control to set the zoom ratio
to a position where F and the zoom indicator
glow green.
• When the zoom ratio is set to a position where F and the zoom indicator glow green, the
camera can focus on subjects as close as approximately 30 cm (1 ft) from the lens.
When the zoom is at the position where G is displayed, the camera can focus on subjects
as close as approximately 10 cm (4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C The Macro Mode Setting
• The setting may not be available with some shooting modes (E17).
• The setting applied in A (auto) mode is saved in the camera’s memory even after the camera is
turned off.
Macro mode