Filter
Top Products
E47
Reference Section
Using Preset Manual
Use the procedure below to measure the white balance value under the lighting used during
shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Use the multi selector HI to select Preset
manual in the White balance menu, and
press the k button.
• The camera zooms in to the position for measuring white
balance.
3 Select Measure and frame the reference
object in the measuring window.
• To apply the last measured value, select Cancel and press
the k button.
4 Press the k button to measure the value.
• The shutter is released and measurement is complete. No image is saved.
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
Preset manual
Incandescent
Incandescent
Incandescent
Fluorescent
Fluorescent
Fluorescent
Cloudy
Cloudy
Cloudy
Daylight
Daylight
Daylight
Auto
Auto
Flash
Flash
Flash
White balance
Preset manual
Cancel
Measure
Measuring window