Filter
Top Products
CaptureNX-D Reference Manual
37
Introduction Viewing Pictures Filters Image Adjustment Other Features Menu Guide
Batch Processing
The File> Run Batch Process option can be used to perform the same image
adjustments on all pictures in a selected folder and then export the processed
images in a selected le format. Batch processing options are shown below.
q
w
r
y
i
o
e
t
u
q
Source folder: Click Browse to choose a source folder. To include all images in
sub-folders under the selected folder, select Include subfolders.
w
Adjustments: Select Apply current adjustments to process the images using
the adjustments for the current image. To apply adjustments previously
saved from the adjustment manager, choose Adjustments to apply and click
Browse to choose an adjustments le. To export the images in the selected
folder in another format without changing the settings currently selected for
each image, choose Apply adjustments already in les.
e
File format: Select the format in which the processed les will be saved. Choose
from JPEG, TIFF 8 bit, and TIFF 16 bit.
r
Quality (JPEG only): Use the slider or pull-down menu to choose a value between
0 and 100. The higher the value, the lower the compression ratio and the
higher the image quality; the lower the value, the higher the compression
ratio and the smaller the le size.
t
Use LZW compression(TIFF only): Compress TIFF les using “lossless” LZW compres-
sion.
LZW compression may sometimes increase le size when applied to 16‑bit images.
y
Resolution: Select this option to choose the output resolution.
u
Embed ICC prole: Select this option to embed the current color prole in each
image.
i
Specify size: Select this option to resize pictures saved in the new format. The
new size can be entered in pixels, centimeters, or inches. When you enter a
value for either Long edge or Short edge, the remaining value will automati-
cally be adjusted to maintain the original aspect ratio.
o
Destination: Select Use source folder to save the processed les to the current
folder. To choose a dierent folder, remove the check from this option and
click Browse. To save the processed les under the same names as the origi-
nals, select Use source le name (if a le with the same name and extension
already exists in the current folder, the processed le will be renamed by add-
ing a number to the le name); to choose dierent names, remove the check
from this option and click Edit.