Filter
Top Products
E26
Reference Section
3 Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do
not use force when connecting or disconnecting the plugs.
4 The camera automatically turns on.
• When properly connected, the PictBridge startup screen
(
1
) is displayed in the camera monitor, followed by the
Print selection screen (
2
).
B If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (E83) in the
camera’s setup menu to Off, then connect the camera again.
Print selection
12