Filter
Top Products
E95
Reference Section
Error Messages
Display Cause/Solution A
O (flashes)
Clock not set.
Set date and time.
E67
Battery exhausted. Charge or replace the battery. 14, 16
Battery temperature is
elevated. The camera
will turn off.
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. After five seconds, the monitor will turn off
and the power-on lamp will flash rapidly. After the lamps
flash for three minutes, the camera will turn off automatically.
Pressing the power switch also turns off the camera.
25
The camera will turn
off to prevent
overheating.
The camera has become hot.
The camera turns off automatically. Leave the camera off
until it has cooled and then turn it on again.
92
Q (● flashes red)
Camera cannot focus.
• Refocus.
• Use focus lock.
28, 71
70
Please wait for the
camera to finish
recording.
Camera cannot perform other operations until recording is
complete.
Wait until message clears from display automatically when
recording is complete.
–
Memory card is write
protected.
Write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.
–