Filter
Top Products
E79
Reference Section
Auto Off
When the camera is on and a period of time passes without any operations having been
performed, the monitor will be turned off and the camera will enter standby mode (A25) to
save power. In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, or 30 min can be selected.
C When the Monitor Turns off for the Power Saving Function
• Power-on lamp flashes in standby mode.
• Camera turns off after approximately three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
- Power switch, shutter-release button, A button, c button or b (e movie-record) button
C Auto Off Settings
• The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
- When a menu is displayed: Three minutes minimum (or 5 min or 30 min, if these settings are
selected)
- During slide show playback: up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
- When an audio video cable is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
Press the d button M z menu icon M Auto off M k button