Filter
Top Products
22
Basic Steps for Shooting and Playback
C Changing the Language or the Date and Time Setting
• You can change these settings using the Language and Time zone and date settings in the
z setup menu (A98).
• You can enable or disable daylight saving time in the z setup menu by selecting Time zone and
date followed by Time zone. Press the multi selector K and then H to enable daylight saving
time and move the clock forward one hour. The clock moves back one hour when you disable
daylight saving time. When the travel destination (x) is selected, the camera automatically
calculates the time difference between the travel destination and the home time zone (w), and
saves images using the date and time of the travel destination.
• If you exit without setting the date and time, O flashes when the shooting screen is displayed. Use
the Time zone and date setting in the setup menu to set the date and time (A98).
C Clock Battery
• The camera clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or when the
camera is connected to an optional AC adapter, and it can run the clock for several days after
about ten hours of charging.
• If the backup battery becomes exhausted, the date and time setting screen is displayed when the
camera is turned on. Set the date and time again. See “Preparation 4 Setting the Display Language,
Date and Time” (step 3, A20) for more information.
C Imprinting the Shooting Date on Printed Images
• Set the date and time before shooting.
• You can permanently imprint the shooting date on images as they are captured by setting Print
date in the setup menu (A98).
• You can use the ViewNX 2 software (A82) to print the shooting date on images that were
captured without using the Print date option.