Filter
Top Products
48
Appendices
Creating ftp Profi les Using the Camera Menus
In transfer mode, the camera menus can be used to create ftp profi les in place of
the WT-3 Setup Utility. Before creating an ftp profi le with the camera menus, set
the camera USB option to PTP and connect the WT-3. To prevent unexpected loss
of power, be sure the battery is fully charged or use an optional EH-6 AC adapter.
The drain on the battery can be reduced by selecting Off for the Wireless trans-
mitter > Wireless LAN system option in the camera setup menu before adjusting
ftp settings.
1
Turn the camera on.
2
Select Transfer mode for Wireless transmit-
ter > Mode ( 34).
Firewalls
The WT-3 uses TCP ports 20 and 21 for ftp. It may be necessary to adjust fi rewall settings
before connecting to a server behind a fi rewall ( 16).
Using the Menus
If the shutter-release button on the camera or WT-3 is pressed while menus are displayed,
the monitor will turn off and any changes to the current profi le will be lost. Do not press the
shutter-release button while editing profi les.
Editing Existing ftp Profi les
See the Menu Guide for information on using the camera menus to edit existing ftp profi les
( 35).
3
A profi le list will be displayed showing the con-
nections available in transfer mode. Highlight
FTP registration and press the multi selector to
the right. Note a new ftp profi le can not be cre-
ated if the camera already contains nine profi les; if
necessary, delete a profi le using the button.