Filter
Top Products
28
Nokia A032 Addendum
Configuration
To configure the A032 to use Radius
authentication, carry out the following steps
(the items within <> are user-specified, the
other text must be typed as shown):
1 Set the Radius secret and the password
common to all APs:
set shared_secret
<shared_secret> <password>
2 Set the IP addresses of the primary and
secondary radius servers (if only one server
is present, set the primary and secondary
addresses to be the same):
set radius_server 1
<xxx.xxx.xxx.xxx>
set radius_server 2
<yyy.yyy.yyy.yyy>
3 Set the WEP mode and specify that a Radius
server is to be used for key lookup:
set wep_mode <mode> radius
4 Set the admission policy to only permitted
stations:
set admission named
5 Restart the AP:
restart