Filter
Top Products
3G10WV HSPA Wi-Fi Router with Voice – 57
7.4.3 Dynamic Route
To activate this option, select the Enabled radio button for Global RIP Mode.
To configure an individual interface, select the desired RIP version and operation, followed by placing a check
in the Enabled checkbox for that interface. Click Save/Apply to save the configuration and to start or stop
dynamic routing.
7.5 Domain Name Servers (DNS)
7.5.1 DNS Server Configuration
If the Enable Automatic Assigned DNS checkbox is selected, this device will accept the first received DNS
assignment from the Wireless Area Network (WAN) interface during the connection process. If the checkbox
is not selected, a field will appear allowing you to enter the primary and optional secondary DNS server IP
addresses. Click on Save to apply.
NOTE: Click the Save button to save the new configuration. To make the new configuration effective, reboot your Router.