Nortel Networks 241-5101-200 Switch User Manual


 
Chapter 4 Configuring the Passport 8250 for operations 41
Passport 8250 Installation Guide R2.2
where
[set] configures the clocking scheme for the Passport 8250 device.
For details on the clockconfig parameters, see “Clockconfig command
parameters” (page 41).
Table 4
Clockconfig command parameters
Parameter Values Definition
External Primary
Board Number
0 = network board (default)
1 = service board in slot 1
2 = service board in slot 2
3 = service board in slot 3
The board that
contains the
primary port.
External Primary
Port Number
When External Primary Board
Number is 1, 2, or 3, 1 to 16 for
the T1/E1 ports.
When External Primary Board
Number is 0, 3 for the ATM
uplink port (default).
The primary port.
External Secondary
Board Number
The same as the External
Primary Board Number.
The board that
contains the
secondary port.
External Secondary
Port Number
The same as the External
Primary Port Number.
The secondary
port.
(Sheet 1 of 2)