Filter
Top Products
Using the APGEN Utility
893-769-A 3-17
If you are not sure of the location of the script server or the default (root) script server directory path, use
the SHOW SCRIPT SERVER command:
TS3395> show script server
TS/720 V5.2 Rom 470003 HW 00.02.00 Lat Protocol V5.2 Uptime: 118 23:21:23
Address:00-00-81-FF-4B-15 Name:XFF4B15 Ethernet:A Number: 0
Script Servers:
Entry 1: 140.179.305.248 /tftpboot/scripts /
The display shows the domain name or Internet address of the script server and the location of the script file.
Initializing the Terminal Server After Running a Script
After you execute the script file, initialize the terminal server. This updates the permanent database and
causes the DEFINE commands in the script to take effect. If you have the CHANGE feature enabled, some
commands will take effect immediately, because this feature updates the permanent and operational
databases. If you have modified commands in the script file to enable configurable or keyed features, you
will need to modify the script and execute it again. See the section “Enabling Configurable and Keyed
Features,” earlier in this chapter, for more information about this process.
Troubleshooting the Script File
If a command line in the script file contains an error, the command interface displays an error message and
continues executing the script. For example, the following message appears during script execution if the
DEFINE SERVER INTERNET SUBNET MASK command specifies an invalid subnet mask:
.
.
.
Server Menu Information
Server PPP Information
Ip Data
Model 3395 -703- Value invalid or out of range "1288"
Internet SNMP
Parameter Server Information
Server Features
.
.
.