Filter
Top Products
Using the APGEN Utility
3-18 893-769-A
The position of the error message relative to the comment lines on the screen indicates where the error
occurred: in the section that defines Internet characteristics (Ip Data). To correct the error, open the script
file and find the section on Ip data. Then locate the invalid value.
In this example, the following command has the invalid value:
DEFINE SERVER INTERNET SUBNET MASK 1288.3.0.100
Edit the command line to correct the error. You can then execute the script again, or enter the DEFINE
command through the Model 3395 command interface on the terminal server.
Updating APGEN Script Files
When users modify features with DEFINE commands from the terminal server, the server updates the
parameter file on the parameter server. To ensure that the APGEN script file for a terminal server reflects
the most current version of the parameter file, run the utility at regular intervals on the parameter file to
create a current script file. To compare the differences between an old script file and a current script file, use
the UNIX diff utility, described in Chapter 4.