Filter
Top Products
8
Preparing for installation
Computer Telephony Adapter 150 Installation Guide
Norstar KSU configuration
There are no specific configuration requirements to support TAPI
applications on a Norstar KSU. Some configuration options commonly
enabled by a CTI user for the “attached set” are:
Handsfree/Headset:
Useful when performing extensive PC-based directory
dialing
Offhook External Prime-Line:
Allows a TAPI application to default dial
internal or external calls
Offhook Linepool Prime-Line:
Allows a TAPI application to default dial
internal or external calls
Note 1:
This release of the Norstar TAPI SP only supports control of the
phone that is physically connected to the interface device.
Note 2:
If CLID/ANI is supported by the KSU, TAPI applications will
receive caller information even if the associated phone is not configured to
display it.
Note 3:
If Handsfree is enabled on the attached phone, remember to enable
Auto handsfree as well.
Line cards
No special line card is required to connect a PC to the Norstar KSU.
Telephones supported
The following Norstar Telephones are supported:
• M7100
• M7208
• M7310
• M7324