Filter
Top Products
12
Norstar TAPI SP installation
Computer Telephony Adapter 150 Installation Guide
Port
For an external interface device, select the serial port to which the
device is connected on your PC.
Base Address
Select the address that matches the switch settings on your card or
port.
IRQ
Select an available hardware interrupt number for your computer. For
the CTA 150i card, valid values are in the range from 2 to 7, and 9.
7. Click
OK
when you have finished setting the properties for your
interface device.
A message appears, warning that changes will only take effect when
you restart Windows.
8. Click
OK
to confirm.
9. When the
Installation Complete
dialog appears, you can click either
View README
to see the README.TXT file, or
Return to
Windows
to exit the setup program.
10. Restart Windows.
You may now install, configure, and run the TAPI application(s).
Configuring Norstar TAPI SP
Note:
There is generally no need to configure the Norstar TAPI SP after
installation, since it is done as part of the installation procedure.
Typically, post-installation configuration is only required should an
interface device need to be moved to a different serial port on the PC.
To configure the Norstar TAPI SP:
1. Locate the
Control Panel
icon as follows:
(Windows 3.1)
Double-click the
Main
program group in the Program
Manager.
The
Main
group displays.
(Windows 95)
Double-click the
My Computer
icon.
The
My Computer
group displays.