Filter
Top Products
Norstar TAPI SP installation
9
Computer Telephony Adapter 150 Installation Guide
Norstar TAPI SP installation
Norstar TAPI SP software installation
This section describes the procedures that must be performed to install the
Norstar TAPI SP.
Pre-installation checklist
Before installing the software, complete the following pre-installation
checklist.
1. Verify that your PC meets the minimum hardware and software
requirements. Verify that the interface device is connected and that the
telephone connected to the interface device is operational. Make sure
that the telephone has at least one DN key to support dialing and
answering calls from the TAPI application.
2. Ensure that a previous version of the Norstar TAPI Service Provider is
not running, by following these steps:
a) Locate the Control Panel icon as follows:
(Windows 3.1)
Double-click the
Main
program group in the
Program Manager.
The
Main
group displays.
(Windows 95)
Double-click the
My Computer
icon.
The
My Computer
group displays.
b) Double-click the
Control Panel
icon.
The
Control Panel
window displays the
Telephony
icon.
c) Double-click the
Telephony
icon, if it appears. (If it does not
appear, the Norstar TAPI Service Provider is not running.)
(Windows 3.1)
The
Telephony
dialog box displays.
(Windows 95)
The
Telephony Properties
dialog box displays.
d)
(Windows 3.1)
Click
Driver Setup
.
The
Telephony Drivers
dialog box displays. If there is a Norstar
Telephony SP entry, click
Remove
to uninstall it. Restart the PC
before proceeding with the installation.
(Windows 95)
If there is a Norstar Telephony SP entry, click
Remove
to uninstall it. Restart the PC before proceeding with the
installation.