Filter
Top Products
62 Chapter 4 Installing option cards and DIMMs
NN46110-308 02.01
To replace the DIMM in the VPN Router 600:
1 Shut down the VPN Router 600 using the Web GUI or the CLI, and then
unplug it as described in “Shutting down the system to add or replace
hardware” on page 52.
2 Remove the chassis from the steel enclosure (see “Opening the Nortel VPN
Router 600” on page 52).
3 Attach an antistatic wrist strap.
4 Locate the DIMM slot on the system board (Figure 13 on page 55).
5 Pull the locking levers back to release the DIMM.
The DIMM snaps up from the circuit board.
6 Pull the DIMM out of the slot.
7 Insert the new DIMM into the slot at a 45 degree angle (Figure 18).
Use the alignment keys on the DIMM to properly position the DIMM in the
connector.
Warning: Risk of electric shock
Turn off the VPN Router 600 and unplug it before you attempt to replace
the DIMM.
Caution: Risk of equipment damage
Electrostatic discharge can damage VPN Router 600 components.