Nortel Networks SRG50 Network Router User Manual


 
28 Chapter 3 Task summary
NN40140-500NN40140-500
iii) For calls coming in from the private network
Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private
Network panel > Private Network Settings subpanel > Private Received number length
field
and
Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private
Network panel > Private Network Settings subpanel > Private DN length field
(Private DN length is used for DPNSS applications only. See the Networking Configuration
Guide (NN40020-603).)
Internal Reference: Basic parameters on page 67
External Reference: Networking Configuration Guide (NN40020-603)
6 Verify the line pool assignment of VoIP trunks.
In the default configuration, the VoIP trunks are assigned to line pool BlocA. Instructions in
the SRG50 Configuration Guide assume that the default configuration has been maintained.
Configuration > Telephony > Lines > Active VoIP Lines > Active VoIP Lines table > Line
Type column > Line Type field
External Reference: Networking Configuration Guide (NN40020-603)
7 The SRG supports four analog loop trunks on the main unit*. Verify the line pool assignment
of these trunks.
In the default configuration, these trunks are assigned to line pool A. Instructions in the
SRG50 Configuration Guide assume that the default configuration has been maintained.
Configuration > Telephony > Lines > Active Physical Lines > Active Physical Lines table
> Line Type column > Line Type field
External Reference: Networking Configuration Guide (NN40020-603)
* Category 1 countries
IP telephone configuration
1 Configure the registration password.
Configuration > Resources > Telephony Resources > IP Sets row > Details for Module
subpanel > IP Terminal Global Settings tab
Internal Reference: Registration password on page 53
2 Configure the local mode indication (Advertisement/Logo).
Configuration > Resources > Telephony Resources > IP Sets row > Details for Module
subpanel > IP Terminal Global Settings tab
Internal Reference: Local mode indication on page 55