Filter
Top Products
46 Chapter 4 CS 1000 considerations
NN40140-500NN40140-500
To datafill the S1000 Main Office Settings panel
1 In Element Manager, navigate to Configuration > Resources > Survivable Remote Gateway
(see the figure S1000 Main Office Settings panel on page 46).
2 Select the S1000 Main Office Settings tab.
3 Enter the information in the appropriate fields.
Figure 5 S1000 Main Office Settings panel
Node ID 9999 (default)
Range: 0 to 9999
Automatically written to the IP telephone firmware
when the IP telephone registers with the main
office.
Used to identify the node on the main office
associated with the IP telephone DN.
MO Access Code Length For CDP dialing plans: set to 0
For UDP dialing plans: set to
length of line pool access code or
destination code in front of LOC.
Range: 0 to 34
The number of digits to add to the BUID (DN) so
the main office system can determine if the
incoming call is valid.
Table 8 S1000 Main Office Settings (Sheet 3 of 3)
Field Values Description