Filter
Top Products
56 Chapter 5 IP telephones setup and configuration
NN40140-500NN40140-500
Figure 8 Modules panel, IP & Application Sets
Telephone (DN) records configuration
DN records for IP telephones are configured through the All DNs panel (Configuration >
Telephony > Sets > All DNs (see the figure All DNs panel on page 58). The Networking
Configuration Guide (NN40020-603) and the Device Configuration Guide (NN40020-300)
provide basic instructions for configuring DNs and IP telephones. The following instructions are in
addition to these instructions and only apply to IP telephones that are to be redirected to a main
office call server.
To configure DN records for redirected IP telephones
1 In Element Manager, navigate to the All DNs panel (Configuration > Telephony > Sets > All
DNs).
2 Select the Line Access tab.
3 Identify the row of the DN record to be configured.
4 Refer to the list of numbers and phone models recorded in the table (see CS 1000
considerations on page 33).
Note: It is assumed that the line pools have been assigned. In the default
configuration, VoIP trunks are assigned to line pool BlocA and the four
PSTN trunks are assigned to line pool A. For more information, see
SRG50 overview on page 15.