Filter
Top Products
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
110
Copyright © Nortel Networks Limited 2006
Procedure 31 Configuring the SIP Application Module tabs
At the System Management Console,
1 Use the values from the following table to enter into the
Authentication tab parameters.
ATTENTION
Do not click Apply until you have FINISHED configuring all the
tabs.
Table 2 Authentication tab (Sheet 1 of 2)
Parameter
Recommended
value Notes Example
Authorized SIP Nodes <IP addresses of
other trusted
application servers,
conference servers,
and gateways this
application module
interacts with. A
trusted relationship
implies that this
endpoint will not be
authenticated by the
application module.
Also, trust can be
applied to nodes
that cannot perform
user authentication,
like conference
servers and
gateways.>
Enter
addresses
individually.
Enter IPs of any
gateways or
conference servers
being used. Also,
enter the public
machine logical IPs
of any IPCMs being
used.
Note: Do not put in
any WiCM servers,
since they are not
trusted nodes.
Private Key MCP default