Filter
Top Products
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
26
Copyright © Nortel Networks Limited 2006
Hardware required for the 2-server system consists of the following:
• terminal server: 1 MRV LX-4008-101AC including
— Linux-based secure console standalone unit with 8 RS232 RJ45
ports
— internal V.90 modem and AC power
— software and documentation on CD-ROM
• core servers: 2 Sun Fire V210 servers including
— 1 1.34-GHz UltraSPARC IlIi Processor with 1-MB On-Chip L2
Cache
— 1-GB Memory
— 2 swappable 73-GB Ultra 160 SCSI disks (second disk for
mirroring)
—CD-ROM
— 2 10/100-Mbit Ethernet and USB Ports
— System configuration card
— Solaris* 8 and ALOM v1.5 pre-installed
— two (2), cat-5 Ethernet cables for each V210 server (for a total of
four (4) ethernet cables)
Note: Each V210 server uses two (2) ethernet cables to
connect the V210 servers to the layer-2 switch.
— two (2) serial (RS232) cables for each V210 server (or a total of
four (4) serial cables.)
Note: Serial cables are ordered with the MRV LX terminal
server.
– one (1) cable for Serial Net MGT (LOM) port
– one (1) cable for Serial MGT port
— Sun Fire V210 server documentation
• Media Application Server: 1 IBM x336 (2- 3.6 GHz Xeon, 1-GB
RAM, 1 73-GB SCSI drive, Windows 2000)
• Multimedia PC Clients