Filter
Top Products
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Installing the UFTP BaseSoftware
You will be installing the UFTP software on the application server.
Prerequisites
The System Management Console has been successfully installed and
started.
Note: This procedure also assumes that the IP Client Manager
(IPCM) component was deployed successfully; the UFTP software
therefore can interact with the IPCM for firmware.
Add the UFTP to the System Management Console
Procedure 34 Adding the UFTP software
At the System Management Console,
1 Select Sites->MgmtSite->AppSvr.
2 Click on the plus sign next to the component to which you are
adding the base software.
3 Right click on the Components folder.
4 Select Add->BaseSoftware.
5 A list of loads appears in the pop-up window. Select the latest
“UFTP” load.
6 Click Apply.
Note: The UFTP BaseSoftware has no configuration items.
Once the installer clicks Apply, the deployment of the UFTP
BaseSoftware occurs immediately. Once the deployment is
complete, UFTP will appear in the System Management
Console file tree.