Revision 04062009 Page 11 of 52
FRONT PANEL
From Top to Bottom (M12 only):
RJ45 Port Auto Sensing 10/100 Base-TX Connections with PoE Support
Power Port
PWR LED lights when Power is supplied to the unit
LEDs: The table below describes the operating modes:
LED
Color
Description
GREEN
Good Signal (user defined)
ORANGE
Poor Signal (user defined)
RED
Bad Signal (user defined)
Radio
Enabled
GREEN
The radio interface is active
OFF
The radio interface is off
LNK/ACT
GREEN
LAN Link is present
FLASHING
Data is active over the ports
OFF
No Link is present on the LAN port
PWR
GREEN
Power is applied
OFF
No Power is applied