Filter
Top Products
Revision 04062009 Page 26 of 52
TraceRoute: Allows tracing the hops from the N-TRON 702-W device to a selected outgoing IP
address. It should be used for finding the route taken by ICMP packets across the network to the
Destination host.
Resolution of the IP addresses (symbolically rather than numerically) can be enabled by selecting the
Resolve IP address option.
The test is started using the Start button.
Site Survey: utility will search for wireless networks in range on all supported channels while the
device is operating as an Access Point or a Station. In Station mode the channel list can be modified.
Refer to the section Link Setup for the details on channel list customization.
Site Survey will report MAC Address, SSID, Encryption type (if any), Signal Strength, Frequency
and the wireless channel used for each Access Point found.
The Site Survey can be updated using the Scan button.