N-Tron 702M12-W Switch User Manual


 
Revision 04062009 Page 24 of 52
The list can be updated using the Reload button.
N-TRON 702-W examines the destination IP address of each data packet traveling through the
system and chooses the appropriate interface for packet forwarding. The system choice depends on
static routing rules entries, which are registered in the system routing table. Static routes to specific
hosts, networks or default gateway are set up automatically according to the IP configuration of all
the N-TRON 702-W interfaces.
N-TRON 702-W IP configuration description is provided in the Link Setup section.
Show Firewall selection lists active firewall entries in the FIREWALL chain of the standard ebtables
filter table, while the device is operating in Bridge mode.
ATH0 - Wireless Interface
ETH0 - Lan/Wired Interface
BR0 - Bridge Interface of ATH and ETH when in bridge mode
PPP - Interface when utilizing a PPPOE connection
The list can be updated using the Reload button.
Active firewall entries in the FIREWALL chain of the standard iptables filter table are listed if the
device is operating in Router mode.
IP and MAC level access control and packet filtering in N-TRON 702-W is implemented using
iptables (routing) and ebtables (bridging) firewall which protects the resources of a private network
from outside threats by preventing unauthorized access and filtering specified types of network
communication.
More information is provided in the Link Setup section.
Show Port Forward selection shows ports forwarded to internal devices through NAT in router
mode
Show DHCP Leases selection shows the current status of the leased IP addresses by the device’s
DHCP server.
Interface name shows from which device interface DHCP client which has specified MAC Address
is connected.
Remaining Lease time shows for how long the leased IP address will be valid and reserved for a
particular DHCP client.
The list can be updated using the Reload button.