Filter
Top Products
Revision 071108
Page 84 of 102
CLI Commands, Continued…
Save or Reset the Configuration Settings
Command Name
config
Description Save or reset configuration settings
Syntax config s[ave] | r[eset]
Parameters
save
save current running configuration settings.
reset
reset configuration settings to factory defaults.
Examples
N
-
TRON/Admin> config save
Save Settings...
Settings have been saved.
N-TRON/Admin> config reset
Resetting to factory defaults...
Load factory default settings [y/n]?y
Keep IP, subnet mask, and gateway addresses [y/n]?y
Keep current user names and passwords [y/n]?y
…
NOTES
Dongle Operations
Command Name
dongle
Description Perform dongle operations
Syntax dongle info | format [-m model] | compare | erase
Parameters
info
Show information about the dongle (factory access only).
format
Format the dongle to factory default (factory access only).
-m model
Dongle model number: 1=At32K or 2=At64K (default)
compare
Compare the configuration on the dongle to the switch.
erase
Erase the switch configuration on the dongle.
Examples
N
-
TRON/Admin> dongle compare
Comparing dongle configuration...
The configurations are identical.
N-TRON/Admin> dongle erase
Erasing dongle...
Dongle erase completed.
NOTES