Filter
Top Products
(Revised 2010-9-27) Page 143 of 159
CLI Commands, Continued…
Show or Clear the Last System Error
Command Name
Syserr
Description
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
Syntax
syserr [clear]
Parameters
Clear
Clear the last system error.
Example
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Notes
Show System Information
Command Name
Sysinfo
Description
Show system information
Syntax
Sysinfo
Parameters
None
Example
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-TRON 700/7000/7500 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 710FX2
+ Boot Loader: BL 2.0.5.1 (0x02000501)
+ OS Version: 3.2.1
+ Build Date: Dec 8 2009 at 15:10:57
+ Copyright: Copyright (c) 2008-2009 N-TRON Corp. All rights
reserved.
+
+ Processor: 66 MHz (66000000)
+ SDRAM Size: 16 MB
+ Flash Size: 8 MB
+ File System: 6422528 Bytes, 2907136 Free, 3515392 Used, 0 Bad
+ MAC Address: 00:07:af:fd:64:60
+ IP Address: 192.168.1.214
+ Subnet Mask: 255.255.255.0
+ Gateway: 192.168.1.1
+ Cfg Device: Not connected
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
N-TRON/Admin>
Notes