Filter
Top Products
Updating Unit Programs
The following unit programs can be updated.
46
Maintenance
Item Notes
Program 1 (Operation)
Program 2 (G.723.1) DSP program
Program 3 (G.729A) DSP program
Hold tone data µ-law, 8k, 8bit, mono wav file only.
• Start the Maintenance Console Software and connect the VoIP-TA via
the software (
see Chapter IV, page 18, for details on the connection).
• Switch to the software to the installation mode (see Chapter IV, page
21, for details on the mode change).
• When the VoIP-TA is
switched to the installation
mode, the Update button on
the Main window becomes
active. Click on the
Update button.
• The Update window is
displayed. Select the
program or data type that
needs to be updated.
If the updated file name and data
type are incorrect, the system
cannot perform normal operations.
• Enter the file name of the
data to be updated or click
on the Reference button to
select a file to be installed.
Click on the Update button.
The installation process
will begin.
*