Filter
Top Products
47
Maintenance
Do not turn off the power of the VoIP-TA during an update process, as it will
result in a fault.
If an error occurs in the PC or the power of the VoIP-TA is turned off during an
update process, the VoIP-TA cannot perform normal operations. When such
interruptions occur, be sure to update the file again.
• When the update has been completed, click
the OK button.
• Switch the VoIP-TA to the Operation mode
(see Chapter IV, page 21, for details on
mode changes).
Changing the password
The password, used to connect the VoIP-TA to the Maintenance Console
Software, can be changed (be sure to record the new password for later
reference).
Switch the VoIP-TA to the Setup
mode (see Chapter IV, page 21,
for details on mode changes).
• Click on Mode (M) in the
menu bar of the Main window
and select Password change.
• The Password change window
is displayed. Enter the
current password, then the
new password and again the
new password for
confirmation. Click the
OK button.
• Switch the VoIP-TA to the
Operation mode.
The new password will become valid after the VoIP-TA mode change. See
Chapter IV, page 21, for details on mode changes.
*
*