Filter
Top Products
49
User Setup (Function 47)
Many of the adjustments on your OKIFAX 740 can be set
up to default to the settings you prefer. This means that
these settings will be automatically adopted by your
OKIFAX 740 each time you switch it on.
This gives you several advantages:
• It saves you time in day-to-day operation;
• The machine is easier to use;
• Your OKIFAX 740 can be personalised to suit your
needs.
The user parameters which may be set are as follows:
Contrast Adjusts the scanned image for light,
normal or dark documents.
Resolution Adjusts the fineness of detail to normal
or fine.
Receive Mode Sets the normal receive mode to TEL,
FAX, TEL/FAX or TAD.
Redial Count Sets the number of attempts your
OKIFAX 740 will make to place a call
if the remote number does not answer
or is busy. (Certain countries only.)
Ring Resp Sets the number of rings after which
your OKIFAX 740 answers an
incoming call in FAX or TEL/FAX
modes.
Line Select Sets the method of dialling to pulse or
tone dialling to suit your telephone
exchange. (Certain countries only.)
Restricted Access Turns on or off restricted access mode.
When on, this mode requires a
password before anyone may use the
machine to dial out.
Closed Network Sets closed network mode on or off.
When on, this mode rejects incoming
fax calls from machines which do not
have the same ID code as your
OKIFAX 740. This mode may reject
unsolicited fax mail.