Filter
Top Products
46 > INSTALLATION AND RELOCATION PROCEDURE
PRINTING A CONFIGURATION SUMMARY
To check whether the printer is correctly installed, use the control panel
to print the [System Settings List].
1. Press the <MENU> button to display the Menu screen.
2. Press the < > or < > button until [Report/List] is displayed,
then press the < > button.
3. Press the < > or < > button until [System Settings] is
displayed, then press the < > button.
4. Press the <FEED/SELECT> button.
The [System Settings List] will be printed.
5. Press the <MENU> button when printing has completed.
NOTE
If you have made a mistake when operating the control panel, press the
<MENU> button to restart. For details on how to operate the control panel,
refer to “The Control Panel and Menu system” on page 43.
NOTE
> The layout of the [System Settings List] may differ depending on the
configuration and settings of the printer.
> For B6300, [Rear Output Tray] is displayed in the column for Output
Device even when the rear tray is not installed.
> Reports/lists cannot be output to the face up (rear) tray. When the face
up (rear) tray is installed, lower the face up (rear) tray output lever.