Filter
Top Products
20 Microline 320/321 Turbo/n
|
• Your printer has a grounded, 3-prong plug as a safety
feature, and it will only fit into a grounded outlet. If you
can not plug it in, chances are that you have an older, non-
grounded outlet. Contact an electrician to have it
replaced with a grounded outlet. Do not use an adapter to
defeat the grounding.
• To avoid damaging the power cord, do not put anything
on it or place it where it will be walked on. If the cord
becomes damaged or frayed, replace it immediately.
Installation
Installation Hints
• Read the setup and operating instructions in this
document carefully. Be sure to save this document for
future reference.
• Read and follow all warning and instruction labels on the
printer itself.
• Place your printer on a firm, solid surface. If you put in on
something unsteady, it might fall and be damaged. If you
place it on a soft surface (such as a rug, sofa, or bed) the
vents may be blocked, causing it to overheat.
• The printer must be installed near a power outlet which
will remain easily accessible.
• The printer must be installed near a network outlet which
will remain easily accessible.
• Be certain that your power source matches the rating listed
on the back of the printer. If you are not sure, check with
your dealer or with your local power company.