Filter
Top Products
|
User’s Guide: English 51
Changing the Forms Tear-Off Setting
The default setting for Forms Tear-Off is OFF.
32T-FP.eps
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT TOF
Micro Feed
Up
Micro Feed
Down
To change the Forms Tear-Off setting:
1 Press SEL (1) + SHIFT (2).
2 Press GROUP (3) until one of the following lines appears,
depending on which paper feed you are using
REAR FEED Form Tear-Off OFF
BOTTOM FEED Form Tear-Off OFF
3 Press ITEM (4) until Form Tear-Off appears in the second
column.
4 Press SET (5) until the time interval you wish to select
appears in the third column.
5 Press SEL (1) + SHIFT (2) to exit Menu Mode and save
the setting.
!
The status of the Forms Tear-Off menu setting affects
how you set the Top of Form.
!
If the software package you are using “pauses” while
sending data to the printer, Forms Tear-Off may be
activated (if it is enabled through the Menu). The pause
must be for two seconds or more. No data is lost. Uneven
print registration will occur due to the paper movement.
If the problem occurs, use the menu to turn off Forms
Tear-Off.
!
DO NOT use Forms Tear-Off with labels or multi-part
forms!
!
Forms Tear-Off CANNOT be used when the optional
pull tractor is engaged.
2
1
3
4
5