Filter
Top Products
32 Microline 320/321 Turbo/n
|
4 Make sure the wire feed guide (1) is secured in the sheet
guide.
32T-33.eps
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT
TOF
Micro Feed
Up
Micro Feed
Down
PRINT QUALITY
CHARACTER PITCH
HSD
NLQ
UTL
SSD
10 12 15
17
20 PROP
5 Adjust the paper feed guides (1) for the width of the
paper. Place a sheet of paper in the separator. The paper
will feed into the printer.
32T-15.eps
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT
TOF
Micro Feed
Up
Micro Feed
Down
PRINT QUALITY
CHARACTER PITCH
HSD
NLQ
UTL
SSD
10 12 15
17
20 PROP
!
Important!
If the paper does not feed in, remove it. Check the paper
lever position. Make sure the ALARM light is on: if it is
flashing, hold the SHIFT key and press the
CHARACTER PITCH (RESET) key. Reload the sheet
of paper.
!
The factory default setting for the Top of Form (where
the printing should begin) is one inch down from the top
of the page. To change the setting, see “Using Your
Printer, Top of Form (TOF).”
1
1