Filter
Top Products
|
User’s Guide: English 21
• If you’re using an extension cord or power strip with the
printer, make sure that the total of the amperes required by
all the equipment on the extension is less than the
extension’s rating. Generally, the total ratings of all
equipment plugged into any one power line should not
exceed 15 amperes. Don’t exceed this unless you know
that the power line your equipment is plugged into has a
rating above 15 amperes.
• To protect your printer from overheating, make sure no
openings on the printer are blocked. Do not put the printer
on or near a heat source, such as a radiator or heat register.
If you put the printer in any kind of enclosure, make sure
it is well ventilated.
Installation Overview
To install your printer, follow the instructions in this section.
You must complete these steps for your printer to operate
properly.
If you have purchased an option package for your printer,
refer to the documentation you received with that option for
installation instructions.
Installation Location
• Place your printer on a firm, solid surface.
• Allow enough space on each side of the machine to easily
access the platen knob and the various paper feed paths.
• Make sure a power outlet is available nearby.
• If you are using the network connection, make sure a
network connection is available nearby.