Oki ML320Turbo Printer User Manual


 
|
User’s Guide: English 75
Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group Item Settings (Defaults are set in bold italic)
Top Feed Line Spacing 6 LPI, 8 LPI
Bottom Margin Valid, Invalid
Page Width (wide model only) 13.6", 8"
Page Length 11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
Wait Time 500 ms, 1 sec, 2 sec
Page Length Control By MENU Setting, By Actual Page Length
Set-Up Graphics Bi-directional, Uni-directional
7 or 8 Bit Graphics* 8, 7
Receive Buffer Size 64K, 88 K, 1 Line, 32 K
Paper Out Override No, Yes
Print Registration 0, set in 0.05 mm increments: press SEL to shift registration to the left;
press SHIFT + SEL to shift registration to the right.
* Appears only when the MICROLINE Standard emulation is selected.