Filter
Top Products
Page: 88
Service Guide ML590/ML591
Chapter 2 Principles of Operation
2.2.09 Paper Park
If continuous feed paper is installed and printing on cut sheet paper is desired, it is not necessary
to unload the continuous feed paper. The Paper Park feature provides a means of retracting the
continuous feed paper from the paper path, to allow feeding of the cut sheet paper.
Paper Park Operation
Make sure the change lever is in the REAR FEED or BOTTOM FEED position.
Press the "
PARK
" switch on the operation panel.
A reverse line feed operation retracts the paper until paper-end occurs or 19 inches of paper have
been retracted.
Note:
Retracting 19 inches of paper without detecting a paper-end condition causes the line
feed operation to stop. The line feed operation stops because the printer assumes a jam has
occurred.
The operator can press the
SEL
switch to reset the
ALARM LED
and press the
PARK
switch to
continue the park operation.
This operation may be useful when length of the paper to be parked is greater than 19 inches.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)