Filter
Top Products
Single Feed
Minimum: 6.5 x 3.6 inches (16.5 x 9.1 centimeters)
Maximum: 9.5 x 4.1 inches (24.1 x 10.4 centimeters)
Continuous
Non-overlap type
Thickness: .014 inches (.325 millimeters) Maximum
Paper Feed Path: Bottom
Printhead Gap
Information: Refer to the Printhead Gap Information, Section 1.6. .
Labels
Weight: N/A
Width: Microline 590 3.5 to 10.5 inches (8.8 to 26.6 centimeters)
Microline 591 3.5 to 16.5 inches (8.8 to 41.9 centimeters)
Length: 3 to 17 inches (7.62 to 43.18 centimeters)
Thickness: .011 inches (0.28 mm) Maximum (including backing)
Paper Feed Path: Bottom
Printhead Gap
Information: Refer to the Printhead Gap Information, Section 1.6. .
CAUTION: Use Bottom Feed and/or optional Pull Tractor for card stock and labels.
Transparency
Note: Roller marks may mar the transparency under high temperature/
high humidity conditions.
Weight: 12 to 24 lbs. (45 to 90 g/m2)
Width: Microline 590 7.2 to 8.5 inches (18.2 to 21.5 centimeters)
Microline 591 7.2 to 14.3 inches (18.2 to 36.3 centimeters)
Length: 3 to 17 inches (7.62 to 43.18 centimeters)
Thickness: 0.14 inches (0.36 millimeters)
Paper Feed Path: Top
Printhead Gap
Information: Refer to the Printhead Gap Information, Section 1.6. .
1.7.02 Length
Note: The recommended length is specific to paper type.
Rear Feed
Minimum 3 inches (7.62 centimeters)
Maximum 17 inches (43.18 centimeters)
Bottom Feed
Minimum 3 inches (7.62 centimeters)
Maximum 17 inches (43.18 centimeters)
Top Feed
Minimum 3 inches (7.62 centimeters)
Maximum 17 inches (43.18 centimeters)
1.7.03 Number of Copies
Original + 4 Interleaf
Original + 4 Carbonless
Original Cut Sheet
1.7.04 Thickness
0.014 inches / 0.36 mm Maximum Thickness, Rear Feed
0.017 inches / 0.44 mm Maximum Thickness, Bottom Feed
1.7.05 Weight