Filter
Top Products
Page: 116
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.2.24 Pressure Spring
1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
3.2.17
3.2.19
3.2.20
3.2.22
3.2.23
2. Turn the front release gear arm (1) until it is disengaged.
3. Remove the release cam (2). This is the medium size, thick cam.
4. Work the end of the pressure spring (3) free and remove the spring.
5. Remove the front release gear arm. This arm is long, with a serrated edge.
6. Remove the switch lever (4). This is the small lever.