Filter
Top Products
Page: 94
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.2.02 Printhead Assembly
1.
Perform this procedure: 3.2.01
.
2. Open the access cover (1).
3. Lift and remove the ribbon. (Not shown)
4. Pull the head clamp (2) towards the right and then rotate it up to release the printhead (3).
5. Pull the printhead straight up to remove it.
NOTE:
Installation
After installing the printhead, check the printhead gap adjustment.
Refer to Section 3.3 of this
Service Handbook.
P/N 52106001 Ribbon: Black Consumable Both B.2.09
P/N 52106002 Ribbon: Color Consumable Both B.2.09
P/N 50707401 Clamp: Head RSPL Both B.2.06
P/N 50217201 Assembly: Printhead RSPL Both B.2.02