Filter
Top Products
NOTE:
Installation
The tractors must be synchronized. Align the synchronization marks (9) in the same direction.
Verify that the guide holes (10) in the tractor drive gears are facing the same direction.
The left tractor assembly must be positioned to the left (line feed motor side) of the plastic tab and
ground plate.
Lubrication
When lubricating,
refer to Section 3.5 of this Service Handbook.
P/N 50097501 Tractor: Assembly (Narrow) RSPL 590 B.2.05
P/N 50097502 Tractor: Assembly (Wide) RSPL 591 B.2.05
P/N 51228001 Gear: Change RSPL Both B.2.04
P/N 51228101 Gear: Tractor RSPL Both B.2.04