Filter
Top Products
Page: 121
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.2.29 Tractor Assembly
1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
3.2.17
3.2.19
3.2.20
3.2.22
3.2.23
3.2.24
2. Use a needle nose pliers to release the claw of the tractor gear (1) and remove the gear.
3. Remove the change gear (2).
4. Raise the lock levers (3) on the left (4) and right (5) tractor assemblies.
5. Slide the lower tractor feed shaft (6) in the direction of arrow A and remove the shaft. This
shaft is square.
6. Slide the upper tractor feed shaft (7) in the direction of arrow A and remove the shaft. This
shaft is round.
7. Remove the left tractor assembly, the guide (8), and the right tractor assembly.