Filter
Top Products
Page: 117
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.2.25 Carriage Shaft
CAUTION
The space motor assembly, etc. may be left in place when removing the carriage shaft. However,
use extra care when doing so.
The carriage cable should be detached from the space motor before removing the carriage shaft.
1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
2. Push the end (A) of the carriage shaft (1) until it clears the base frame.
3. Pull the carriage shaft free of the base frame.
4. Remove the support protect reset spring (2).
5. Remove the support protector assembly (3).
6. Remove the frame set carriage (4).